Position: Home > Product > Feed Dryer >
Beer Spent Grains Dryer Beer, Spent, Grains, Dryer, Feed, Dryer
  • Beer Spent Grains Dryer
Beer Spent Grains Dryer Details
Brand name DONGDING DRYER
Daily Capacity(t/d) 1.5-12t/h
Final Moisture(%) ≤12%
Drying Temperature(°C) 350-400℃
Total Installed Power (Kw) 24-125Kw
Beer Spent Grains Dryer Overview

Beer Dregs Dryer Introduction
 
The largest amount of by-products in the brewery is the wet brewer's grains, which has the characteristics of low price, large output, rich nutrients, and good fattening effect. However, wet rosin is easily degenerate, so it is easy to pollute the environment during transportation and storage. In recent years, many breweries have begun deep processing of beer by-products. This will not only reduce environmental pollution, but also increase economic efficiency. Zhengzhou Dongding Machinery Development Co., Ltd. The Beer dregs dryer can quickly pre-dehydrate the wet beer slag with a moisture content of about 85% and then dry it to a dry product with a moisture content of about 10%. The lees can be developed into non-conventional feed, which can greatly ease the feed resources. Stressful conditions reduce the cost of farming and increase economic efficiency. At present, this set of equipment has been put into use by many domestic beer companies and feed processing companies.

Beer Dregs Dryer Working Principle
 
The Dongding Drying Equipment Brewery Dryer Production Line consists of brewer's dregs dehydration machine, heat source, feeder, drum drying system (single cylinder or triple cylinder), discharge machine, induced draft fan, unloader and power distribution Cabinet, smashing system, packing system and other components. 
The specific process is as follows: wet slag with moisture content above 80% is squeezed and dehydrated by the dehydration equipment and the moisture is reduced to about 65%, and then through the spiral feeding machine enters the drying system to be dried. Uniformly distributed in the roller board, under the action of rolling, materials are fully dispersed and contacted with the hot air, speeding up the drying heat transfer, mass transfer. During the drying process, the beer slag is discharged to the stencil unloader valve of the Beer dregs dryer under the action of the inclined board and the heat medium. The dried beer slag processed by the system has good color, aromatic odor and strong animal palatability.

Beer Dregs Dryer Advantages
 
1. It has high mechanization degree, high production capacity and continuous operation.
2. The structure of dryer is excellent, simple, easy operation.
3. Low failure rate, low maintenance cost and low power consumption.
4. Good uniformity , rare delicacy after drying.
5. Use frequency conversion to control material flow, which can be easily adjusted according to the needs of users.
 


The above pictures are about the material before dried and after.
Inquiry

If you want to know more about Beer Spent Grains Dryer, please leave a message or send an email to dongding@zzddjt.com

Related News

Copyright(c)2015-2024 DONGDING DRYER sitemap