Air Energy heat pump drying dehumidifier introduction

1, Main machine: Air Energy heat pump drying dehumidifier (heat pump dryer using very little energy input to absorb free heat in the air, used to dry materials) 

 

2, Drying Room: polyurethane foam insulation Warehouse (customized), used to place materials, as well as insulation to avoid heat dissipation. 

 

3, Baking room circulation system: 360° hot air circulation system, the heat can spread to each corner, and take water evaporation away. 

 

4, Exhaust drainage system: condense most hot and humid air into water, and through the fan discharge. 

 

5, Automatic Intelligent control system: according to the most suitable drying process curve, automatic adjustment of temperature and humidity, drying time. 

 

6, Unique heat recovery energy-saving technology: Efficient three-time waste heat recovery dehumidification device, improving energy efficiency 30% than the ordinary heat pump dryer.  

 

Product Features
 

1. Low energy consumption

The perfect combination of high temperature heat pump and heat recovery technology, the average energy consumption of drying 1kg water is 0.2-0.3kw, is 1/6-1/5 of the traditional drying mode.
 

2. Safe and pollution-free

The use of electric drive, no risk of combustion and explosion, no pollutant emissions.
 

3. High drying quality

Drying temperature can reach 80 ℃, fully automatic precision temperature control within ±1℃, greatly improve the drying quality.
 

4. Fully automatic

A variety of drying curves set in the machine, according to different materials, it can accurately control the drying process, which savse time and labors.  Using automatic thermostat device, 24 hours continuous drying operation.

Product Features
 

1. Low energy consumption

The perfect combination of high temperature heat pump and heat recovery technology, the average energy consumption of drying 1kg water is 0.2-0.3kw, is 1/6-1/5 of the traditional drying mode.
 

2. Safe and pollution-free

The use of electric drive, no risk of combustion and explosion, no pollutant emissions.
 

3. High drying quality

Drying temperature can reach 80 ℃, fully automatic precision temperature control within ±1℃, greatly improve the drying quality.
 

4. Fully automatic

A variety of drying curves set in the machine, according to different materials, it can accurately control the drying process, which savse time and labors.  Using automatic thermostat device, 24 hours continuous drying operation.